TAGGED: compression, explicit-dynamics, lattice-structure
-
-
August 26, 2024 at 5:51 am
nerallasandeshdathatreya
Subscriberdoes any one know how to perform a compression test on a lattice structure in ansys
-
August 27, 2024 at 2:18 pm
Chris Quan
Ansys EmployeeIf you are using Explicit Dynamics system or other Mechanical systems such as Static Structural or Transient Structural, you can apply Displacement or Force, or Pressure boundary condition to compress the structure.
A lattice structure can be imported from CAD programs to Mechanical systems in Workbench or created in Workbench using Material Designer under Componenet Systems. See screen snapshot below.
Â
-
September 5, 2024 at 5:37 am
-
Viewing 2 reply threads
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- At least one body has been found to have only 1 element in at least 2 directions
- Script Error Code:800a000d
- Element has excessive thickness change, distortion, is turning inside out
- Elastic limit load, Elastic-plastic limit load
- Image to file in Mechanical is bugged and does not show text
- Help to do quasistatic analysis in static structural module
Top Contributors
-
1927
-
823
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.