Learning Forum

[hkanakri]

Hello All,

I am simulating the following series resonant inverter in Simplorer and I am interested to obtain the normalized frequency response plots at different values of the load quality factor (Q). Please see the pictures below.

1- How I can change the switching frequency interactively in my simulation and record the corresponding input and output voltages?

2- How I can save the simulation results for all the different runs (different Q) and plot them v.s. normalized frequency on the same graph?

[Navya C]

Hi @Haitham_Kanakri You need a feedback control loop
Yes, you can set parametric simulation for different Q values.
Regards Navya

[hkanakri]

Hi Navya,
Thank you for your reply. Got it, that works and answered my questions.
Best Regards ~Haitham