-
-
August 14, 2024 at 8:53 pm
Wira Setiawan Syafruddin
SubscriberHello
I'm running a ship motion simulation in ansys aqwa.
Is it possible to obtain the cut water plane area of a structure in the time domain?
Thank you in advance -
August 16, 2024 at 11:26 am
Shuangxing Du
Ansys EmployeeIn Aqwa-Naut (Hydrodynamic Response - Time Domain Analysis in Regular/Irregular Wave Response in Workebnch), the instantanuous wetted hull surfaces under incident waves are calculated for the nonlinear incident wave and hydrostatic forces. There is not the cut water area definition in this nonlinear analysis.
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- At least one body has been found to have only 1 element in at least 2 directions
- Script Error Code:800a000d
- Elastic limit load, Elastic-plastic limit load
- Element has excessive thickness change, distortion, is turning inside out
- Image to file in Mechanical is bugged and does not show text
- Help to do quasistatic analysis in static structural module
Top Contributors
-
1902
-
807
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.