Learning Forum

[al dou]

我不知道如何设置磨削模拟。我使用了摩擦接触。我对工具中的应力和应变很感兴趣，但我还想看看我是否可以运行一个带有材料去除的简短模拟（如果有的话）。我想模拟一个固定旋转砂轮，其中一个长件接触，并且工具和工件之间有一个角度。我现在正在使用 ANSYS 中的显示动力学模块。我已经设法运行了 n 个显式动态模拟，并且只显示了工具中的材料侵蚀。我的问题是，如何引起工件的材料侵蚀。如果有人能为我提供一些关于如何继续的想法或说明，我将不胜感激！

[Ashish Khemka]

Translated: 

I don't know how to set up grinding simulation. I used friction contact. I'm interested in the stresses and strains in the tool, but I also want to see if I can run a short simulation with material removal, if any. I want to simulate a fixed rotating grinding wheel where a long piece is in contact and there is an angle between the tool and the workpiece. I am currently using the Display Dynamics module in ANSYS. I've managed to run n explicit dynamic simulations and only show material erosion in the tool. My question is, how to cause material erosion of the work piece. If anyone could provide me with some ideas or instructions on how to proceed, I'd be very grateful!

[Ashish Khemka]

Hi,

Please see if the following link helps: 8th International - Session 2 "Methods Development" (ansys.com)

Regards,

Ashish Khemka