We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Ansys Products

Ansys Products

Discuss installation & licensing of our Ansys Teaching and Research products.
  1. All Channels
  2. Ansys Products
  3. I can’t access the results

I can’t access the results

    • April 19, 2024 at 6:09 am
      trung dinh
      Subscriber

    • April 19, 2024 at 12:11 pm
      Rob
      Forum Moderator

      Try right click on the bex and refreshing the Results. However, as you have parameters on you may find you need to look into the design point table to see what results you're looking at. 

      • April 19, 2024 at 12:50 pm
        trung dinh
        Subscriber

        I have tried but it's failed

    • April 19, 2024 at 1:44 pm
      Rob
      Forum Moderator

      If you open Solution do you have results? What do you need the parameters for?

Viewing 2 reply threads
  • The topic ‘I can’t access the results’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.