How to update the geometry without modifying all the other parameters.

- March 25, 2023 at 11:00 am
  
  Fabrizio Fronda
  Subscriber
  
  Hi everybody! As said in the title, I'm having some problems related to the geometry updating , let me be clear: my goal is to conduct a DOE analysis on a helicopter skid landing gear, I've got 36 different models of that skid, each one of these differs from the others by some geometry quotes (I have to change length of the skids, cross section of the tubulars etc. in order to perform the optimization of the skid) but they all share the same "setting" (physical constraints, loads etc.). Now, in order to conduct the DOE analysis, theoretically, I have to change the geometry only, without touching those variables. I have searched in the Forum for similar problems but I have not found anything yet, I was wondering if there is a solution to my issue, It would be annoying modify the variables 36 times. One last thing, I know that I can perform the DOE analysis here in Ansys but for several reasons I have to use Minitab, just saying. Thanks to everyone who can help me.
- March 27, 2023 at 12:12 pm
  
  Ashish Khemka
  Forum Moderator
  
  Hi,
  Please see if this link is of use to you:
  Ansys workbench tutorials : Introduction to parametric design study - YouTube
  Regards,
  Ashish Khemka