Electronics

Electronics

Topics related to HFSS, Maxwell, SIwave, Icepak, Electronics Enterprise and more.
  1. All Channels
  2. Electronics
  3. How to set differential prope parameters in ANSYS for extracting S parameters

How to set differential prope parameters in ANSYS for extracting S parameters

TAGGED: ,

    • October 8, 2024 at 12:55 am
      lijunfang
      Subscriber

      How to set differential prop parameters in ANSYS for extracting S parameters from HDMI PCB? HDMI is version 1.4, how to change these parameters as shown in the screenshot?

    • November 7, 2024 at 10:22 am
      Mrinmoy Bharadwaj
      Ansys Employee

      Hello lijunfang,
      Firstly, you do not extract S-parameters from a TDR probe. TDR probe is for looking at the trace impedance in the time domain. 
      In case you meant extracting the TDR for your PCB, the pulse repetition frequency is generally kept 2 times of the pulse width. This is a general practice only.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.