TAGGED: #fluent-#ansys, dpm, erosion, solid-particle-erosion
-
-
December 14, 2024 at 7:28 am
rahul_kv
SubscriberI am trying to do an erosion study in a pipe case in fluent with different concentrations like 1000 ppm and 2000 ppm, but in DPM injection, I saw the option of flow rate, velocity, and diameter of the particle. But How to set concentration in PPM?Â
-
December 16, 2024 at 10:17 am
Rob
Forum ModeratorYou don't. You need to convert your PPM data into mass for the injection.Â
-
December 16, 2024 at 10:22 am
rahul_kv
SubscriberCan you Please guide me on how to convert it into mass for injection and where to enter that converted mass? As in the Injection option in fluent, I can see the option to enter the flow rate (in kg/s). Is this the input that you mean?
-
December 16, 2024 at 10:35 am
Rob
Forum ModeratorYes, injections work on kg/s. Velocity then governs how quickly that mass enters the domain. Â
-
- You must be logged in to reply to this topic.
- air flow in and out of computer case
- Varying Bond model parameters to mimic soil particle cohesion/stiction
- Eroded Mass due to Erosion of Soil Particles by Fluids
- Centrifugal Fan Analysis for Determination of Characteristic Curve
- Guidance needed for Conjugate Heat Transfer Analysis for a 3s3p Li-ion Battery
- I am doing a corona simulation. But particles are not spreading.
- Issue to compile a UDF in ANSYS Fluent
- JACOBI Convergence Issue in ANSYS AQWA
- affinity not set
- Resuming SAG Mill Simulation with New Particle Batch in Rocky
-
3892
-
1414
-
1256
-
1118
-
1015
© 2025 Copyright ANSYS, Inc. All rights reserved.