We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. How to reduce the affects of Volumetric Locking?

How to reduce the affects of Volumetric Locking?

TAGGED: , , ,

    • November 16, 2020 at 8:35 am
      kirstenbraun
      Subscriber

      Hello all,

      I am developing a 3D model of a tyre in ANSYS mechanical. I believe that my model is undergoing volumetric locking as the model is able to accurately predict the two scenarios that I am running, but then at a point (in both cases) the model becomes overly stiff and the sumilation results unrealistically deviate. My results are as follows:

      TM700_VerticalDisp_vs_VertialForce_10292020.JPG
    • November 19, 2020 at 11:31 am
      Ashish Khemka
      Forum Moderator
      Marking this post as resolved, as it looks a duplicate one.nnRegards,nAshish Khemkan
Viewing 1 reply thread
  • The topic ‘How to reduce the affects of Volumetric Locking?’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.