We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Electronics

Electronics

Topics related to HFSS, Maxwell, SIwave, Icepak, Electronics Enterprise and more.
  1. All Channels
  2. Electronics
  3. How to provide lumped port for grounded CPW?

How to provide lumped port for grounded CPW?

    • May 9, 2022 at 11:01 pm
      mriheen
      Subscriber
      Antenna_on_PCB.PNG
    • May 16, 2022 at 5:38 am
      Chinmay T
      Forum Moderator

      If the top and bottom metals are connected through vias then you have assigned the lumped port correctly.
      If required, you can also draw a rectangle so that the port touches one of the top metals.
      Thanks Chinmay
    • May 16, 2022 at 11:59 pm
      mriheen
      Subscriber
      Thank you for the confirmation. Appreciate it.
Viewing 2 reply threads
  • The topic ‘How to provide lumped port for grounded CPW?’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.