Ansys Innovation Space

FREE STUDENT SOFTWARE

How can I create a composite material(graphite -epoxy) with layup??

- May 24, 2021 at 4:52 am
  
  nizhantiw
  Subscriber
  
  I want to create a new composite material with layup
- May 31, 2021 at 11:22 am
  
  1shan
  Ansys Employee
  
  You can find different composite materials in the composite material data source under engineering data. You could create or modify one of these materials to have properties of graphite-epoxy. Have a look at this tutorial series 1. https://www.youtube.com/watch?v=oRDJg5ApnmI&list=RDCMUCdymxOTZSP8RzRgFT8kpYpA&index=3 2. https://www.youtube.com/watch?v=5M72kiPe4Ho, 3. https://www.youtube.com/watch?v=uksnwgiBVEg, 4. https://www.youtube.com/watch?v=5mvHCx-qftk, 5. https://www.youtube.com/watch?v=Zp8qp0fYYHo. You could find additional information in the ACP User's Guide.
  Regards Ishan.

Viewing 1 reply thread

The topic ‘How can I create a composite material(graphite -epoxy) with layup??’ is closed to new replies.

Ansys Assistant

Hey there, you are quite inquisitive!
You have hit your hourly question limit.
Please retry after '10' minutes.
For questions, please reach out to ansyslearn@ansys.com.

RETRY

Are you sure you want to leave? The window will be closed.

OK