-
-
May 29, 2024 at 7:43 amArunjyoti SarkarSubscriber
Hello All,
I am trying to do a harmonic analysis of a vertical cantilever standing in water using HROCEAN command.
The structure is simple. I have attached the full command list below.
It seems that the simulation is running, but I am not able to get any plot in POST.Â
If anyone knows how to use this command properly, please go through and let me know what mistake I am making there.
Thanks in advance
Arun
------------------------------
!!!!!!!!!!!!!!!!! Â Structure start
/PREP7 Â
!* Â
/NOPR Â Â
KEYW,PR_SET,1 Â Â
KEYW,PR_STRUC,1Â
KEYW,PR_THERM,0Â
KEYW,PR_FLUID,0Â
KEYW,PR_ELMAG,0Â
KEYW,MAGNOD,0 Â Â
KEYW,MAGEDG,0 Â Â
KEYW,MAGHFE,0 Â Â
KEYW,MAGELC,0 Â Â
KEYW,PR_MULTI,0Â
/GOÂ
!* Â
/COM, Â Â
/COM,Preferences for GUI filtering have been set to display:
/COM,  Structural  Â
!* Â
!* Â
ET,1,BEAM188
!* Â
!* Â
MPTEMP,,,,,,,, Â
MPTEMP,1,0 Â
MPDATA,EX,1,,200e9 Â
MPDATA,PRXY,1,,.3 Â Â
MPTEMP,,,,,,,, Â
MPTEMP,1,0 Â
MPDATA,DENS,1,,7850Â
*CSET,1,2, Â Â Â 1,2, Â Â
MPCOPY, ,1,2
TBCOPY,ALL,1,2 Â
!* Â
MPTEMP,,,,,,,, Â
MPTEMP,1,0 Â
MPDE,DENS,2Â
MPDATA,DENS,2,,1025Â
SECTYPE, Â 1, BEAM, CTUBE, , 0 Â
SECOFFSET, CENTÂ
SECDATA,2.96,3,0,0,0,0,0,0,0,0,0,0Â
!!!!!!!!!!!!!!!!!!!!!!!
N, ,,,-50,,,, Â Â
N, ,,,-45,,,, Â Â
N, ,,,-40,,,, Â Â
N, ,,,-35,,,, Â Â
N, ,,,-30,,,, Â Â
N, ,,,-25,,,, Â Â
N, ,,,-20,,,, Â Â
N, ,,,-15,,,, Â Â
N, ,,,-10,,,, Â Â
N, ,,,-5,,,,
N, ,,,,,,, Â
N, ,,,5,,,,Â
N, ,,,10,,,,
N, ,,,15,,,,
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Â
TYPE, Â 1 Â Â
MAT, Â Â Â 1
REAL, Â Â
ESYS, Â Â Â 0 Â Â
SECNUM, Â 1Â
TSHAP,LINE Â
!* Â
FLST,2,2,1 Â
FITEM,2,1 Â Â
FITEM,2,2 Â Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,2 Â Â
FITEM,2,3 Â Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,3 Â Â
FITEM,2,4 Â Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,4 Â Â
FITEM,2,5 Â Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,5 Â Â
FITEM,2,6 Â Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,6 Â Â
FITEM,2,7 Â Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,7 Â Â
FITEM,2,8 Â Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,8 Â Â
FITEM,2,9 Â Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,9 Â Â
FITEM,2,10 Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,10 Â
FITEM,2,11 Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,11 Â
FITEM,2,12 Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,12 Â
FITEM,2,13 Â
E,P51X Â
FLST,2,2,1 Â
FITEM,2,13 Â
FITEM,2,14 Â
E,P51X Â
FLST,2,1,1,ORDE,1 Â Â
FITEM,2,1 Â Â
!* Â
/GOÂ
D,P51X,ALL,0, , , , , , , , , Â Â
ACEL,0,0,9.807,Â
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Â
SAVE
!!!!!!!!!!!!!!!!!!! Â Structure end
FDELETE,ALL
OCDELETE,ALL
OCTYPE,BASIC
OCDATA,50,2,1,,,1,0,1 Â
OCTABLE,,,0.7,0.7,0,2,2Â
OCTYPE,WAVEÂ
OCDATA,0,180,1,0,0,0 Â
OCTABLE,5,10
OCTABLE,5,12
OCTABLE,5,14
OCTABLE,5,16
OCTABLE,5,18
SAVEÂ
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!HROCEAN,HARMONIC,20
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
FINISH
/SOL
!HROCEAN,HARMONIC,20
!*
ANTYPE,3
HROCEAN,HARMONIC,20
TIME,5
!* Â
!* Â
HROPT,FULL
HROUT,ON
OUTPR,ESOL,ALL
LUMPM,0Â
!* Â
EQSLV, ,1e-06, Â
PSTRES,0
!* Â
/STATUS,SOLU
SOLVE Â Â
FINISH Â
!!!!!!!!!!!!!!!!!!!!!!!!!!
/POST1 Â
SET,LIST
FINISH Â
/POST26Â
FILE,'TEST1','rst','.' Â
/UI,COLL,1 Â
NUMVAR,200 Â
SOLU,191,NCMIT Â
STORE,MERGEÂ
PLCPLX,0
PRCPLX,1
FILLDATA,191,,,,1,1Â
REALVAR,191,191Â
FORCE,TOTALÂ
!* Â
!* Â
ESOL,2,1,1 ,F,X,FX_2
STORE,MERGEÂ
XVAR,1 Â
PLVAR,2, -
May 29, 2024 at 10:21 amAshish KhemkaForum Moderator
Hi,
It seems that you have created one more thread: Harmonic analysis of a beam in water using HROCEAN (ansys.com)
I will close this thread.
Regards,
Ashish Khemka
-
- The topic ‘Harmonic analysis using HROCEAN’ is closed to new replies.
-
1116
-
468
-
445
-
225
-
201
© 2024 Copyright ANSYS, Inc. All rights reserved.