TAGGED: circular-polarization, import-source
-
-
January 4, 2025 at 7:26 amzerui_jinSubscriber
老师您好:
我现在正在做圆极化的仿真,因为圆极化是两个平面波叠起来的,每次仿真只能做一个左旋(右旋)调整相位之后再仿真右旋(左旋),想问问老师,有没有可能用代码驱动仿真,一次性把左旋光和右旋光先后仿真,不需要我中间再手动调整相位,谢谢老师!
Jerry
-
January 8, 2025 at 6:30 amzhang.chenSubscriber
可以,您可以使用set函数设置两个光源,分别为左旋光和右旋光,扫描其中一个光源的相位即可。
-
January 8, 2025 at 6:35 amzerui_jinSubscriber
首先,非常感谢您的回复!
您好,请问有可以参考的示例吗?或者可以参考的代码也可以,还不是很会设置
非常感谢!
-
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
Top Contributors
-
1507
-
599
-
597
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.