We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. FSI and Bounday conditions

FSI and Bounday conditions

    • July 5, 2024 at 2:09 pm
      Abed Zandin
      Subscriber

      I am new to ANSYS and need some guidance by setup in ANSYS Mechanical. I have simulated the pressure in the air caster in ANSYS Fluent with inlet velocity as an input parameter. My results are looking good. Now I want to import the parameters to Mechanical. I now have issues to define the bounday condition. I actually just need to calculate the distance between the bottom of air caster and the floor, blue face. Gravity is activated and there is an user given force, red face. I hope someone is able to help me with that.  

    • July 24, 2024 at 2:44 pm
      Ashish Khemka
      Forum Moderator

      Hi,

      Do you want to find the distance between two bodies or how to setup the analysis with given distance?

      Regards,

      Ashish Khemka

Viewing 1 reply thread
  • The topic ‘FSI and Bounday conditions’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.