We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
LS Dyna

LS Dyna

Topics related to LS-DYNA, Autodyn, Explicit STR and more.
  1. All Channels
  2. LS Dyna
  3. Failed linking of two systems in the project schematic

Failed linking of two systems in the project schematic

TAGGED: 
    • May 23, 2022 at 5:17 pm
      Ben_Ben
      Subscriber
      In the first solution I've found that the .cdb file is missing. I tried rebuilding the model from scratch but got the same error

      Could this be part of the problem? If so how can I produce that file.
    • May 24, 2022 at 10:52 am
      Ben_Ben
      Subscriber
      I am wondering if these warnings are causing the error.


    • May 24, 2022 at 4:09 pm
      Ben_Ben
      Subscriber
      I have solved my problem. The inclusion of Mass Scaling was preventing the transfer of the solution in the project schematic. I turned off Mass Scaling, reran and the solution transfer now works.

Viewing 2 reply threads
  • The topic ‘Failed linking of two systems in the project schematic’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.