We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. FACING ISSUE IN QUAD MESHING – ANSYS WORKBENCH (Modeled with space claim)

FACING ISSUE IN QUAD MESHING – ANSYS WORKBENCH (Modeled with space claim)

    • July 6, 2024 at 2:37 pm
      ANSYS EXPLORER
      Subscriber

      Dear Experts ,

      Not able to achieve the Quad mesh near the bolt holes of a flange model . Kindly advise.

       

      Regards

      AE

       

    • July 8, 2024 at 8:35 pm
      Armin
      Ansys Employee

      Hello,
      The element size at the upper and lower regions of the holes approaches essentially zero. Try modifying the partitions such that there is enough material in the radial direction (in the dark green region where the holes are present).

Viewing 1 reply thread
  • The topic ‘FACING ISSUE IN QUAD MESHING – ANSYS WORKBENCH (Modeled with space claim)’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.