We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.
  1. All Channels
  2. 3D Design
  3. Error unfolding a Cone

Error unfolding a Cone

TAGGED: ,

    • July 29, 2021 at 9:26 am
      Andrea Ventura
      Subscriber
      Hello, a customer found this bug. This cone unfolded part is wrong. It takes the external surface to calculate the unfold. The right calcule is with K=0,5 (or midsurface). I can send you privately the file.
    • July 29, 2021 at 11:24 am
      Subashni Ravichandran
      Forum Moderator

      Hello DrkAngl

      I believe a bug has already been filed for this, although I will need to check again with my team.

      Can you please share the file via Secure Transfer? I'll send you the secure link in a separate email.

Viewing 1 reply thread
  • The topic ‘Error unfolding a Cone’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.