- 
		
			- 
April 13, 2024 at 10:17 am
- 
April 19, 2024 at 1:40 pmNKC Forum ModeratorHi Ebenezer, Please check "Drawing an Equation-Based Curve" section under Maxwell Help > Ansys Electronics 2023 R2 Regards, Navya 
 
- 
Viewing 1 reply thread
	
- The topic ‘equation based curve’ is closed to new replies.
                Innovation Space
                 
            
            
            Trending discussions
             
        
        - Lumped Port Deembed
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Three-Phase Voltage Imbalances in dual stator electric generator
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
- Co-simulation in Q3D, Icepak – meshing problem
            Top Contributors
             
        
        - 
                        
                        4167
- 
                        
                        1487
- 
                        
                        1358
- 
                        
                        1189
- 
                        
                        1021
            Top Rated Tags
             
        
        
    © 2025 Copyright ANSYS, Inc. All rights reserved.
            Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
        
    


 You are navigating away from the AIS Discovery experience
You are navigating away from the AIS Discovery experience 
               
          