TAGGED: #ansys-#structure-#solveIssue
-
-
May 9, 2024 at 1:02 am
devilheart4300
SubscriberHow to find output as effective young modules of an elastoplastic material by using strain stress curve.
-
May 9, 2024 at 9:19 am
Ashish Khemka
Forum Moderator -
May 9, 2024 at 9:25 am
devilheart4300
SubscriberThis is not helping. actually i have model of gyroid material. I hv to find effective young modulsa compressive strength as output. i see in ansys there is no output as these two. Also i need to find mesh convergence plot, how to proceed with it
-
May 15, 2024 at 1:13 pm
John Doyle
Ansys EmployeeThe effective young's modulus can be derived from ratio of equivalent stress to equivalent strain. It is not a quanitity that is calculated and saved to the results file directly.Â
-
Viewing 3 reply threads
- The topic ‘Effective young modulus’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- At least one body has been found to have only 1 element in at least 2 directions
- Script Error Code:800a000d
- Element has excessive thickness change, distortion, is turning inside out
- Image to file in Mechanical is bugged and does not show text
- Help to do quasistatic analysis in static structural module
Top Contributors
-
1972
-
886
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.