TAGGED: altium, Ansys-Siwave, ODB++-Design
-
-
January 5, 2024 at 2:47 pm
Nikoloz Sekhniashvili
Subscriber
Greetings,I've generated ODB++ files using Altium Designer, and upon importing them into SiWave and performing a Validation Check, I encountered the following error: Disjoint Net Errors - Separating Location.
I have attached screenshots from both Altium and SiWave.
Could you kindly provide guidance on what might be the issue and suggest how I can address it?
-
January 8, 2024 at 3:25 pm
Aymen Mzoughi
Ansys EmployeeThere is a more robust method importing data from Altium to Ansys using Ansys EDB:
https://www.altium.com/enterprise/ansys-showroom
-
Viewing 1 reply thread
- The topic ‘Disjoint Net Errors in SiWave’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- HFSS Incident Plane Wave excitement mode
- Ansys Maxwell 3D – eddy current
- Difficulty/Obstacle: “Parasolid entry check failed for part:”
- dq graph non-conformity
- Simplorer+Maxwell Cosimulation results and Maxwell results mismatch
- Maxwell circuit – PWM
- Ansys-MATLAB Co-Simulation
- Parametrizing coil “terminals” with coil geometry
- Plotting Ex, Ey and Ez in vector forms individually
- Calculating E-field tangential to a 2D resonant structure on a sapphire chip
Top Contributors
-
1987
-
896
-
599
-
591
-
408
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.