Creating Metasurface from Phase profile of unit cells

- November 2, 2023 at 8:04 pm
  
  shahid6134
  Subscriber
  
  From HFSS 15.0, I have S-curve of phase profile vs physical size of patch inside the unit cell in .csv format. (Unit cell size is constant, only patch size is changing).
  
  From MATLAB, I have the phase value required from each unit cell of array. Two queries;
  
  How to generate 2D array with unit cells of desired patch size (using phase profile of each cell from MATLAB) in HFSS.
  How to simulate this array (metasurface) in HFSS with customized theta and phi angles of incident plane wave on the metasurface.
  Generate 2D/3D radar cross section/reflected beam pattern and gain of complete metasurfsace.
  stepwise guidance is requested, thankyou.
- November 6, 2023 at 7:57 am
  
  Praneeth
  Ansys Employee
  
  Hi,
  Thank you for reaching out to the Ansys Learning Forum.
  It looks like this post is a duplicate to this post - Creating Metasurface array from Phase profile of unit cells. Please note that this question is being addressed in the post with the shared link and this post will be closed for further replies. Kindly post the follow-up question if any in the shared link only and refrain from creating duplicate posts in the forum.
  Best regards,
  Praneeth.