Learning Forum

[idenyu8701]

Hi everyone!
This error occurred when I ran two-way fluid-structure coupling.
Does this error mean that my Cortex failed to start normally and cannot perform any calculations?
Or are there other issues that require parameter correction?
Can you help me  solve this problem!

[Federico]

Hello Iden, 

there could be several reasons for this error. I would suggest you review the Fluent transcript for more details.

[Federico]

You can find the transcript in Workbench_project_folder/dp0/FFF/Fluent/*.trn

[idenyu8701]

No problem.

Thank you for your help. I have run the simulation again and it is now faster than 4 seconds.

The picture below shows the current running status.

[idenyu8701]

Hello Federico !

  My fluid-structure interaction simulation is completed but there is a problem when I want to see the results.
In the Ansys How to video, the Structural solution is transferred to the Fluent result. But what I need now is to transfer the Fluent Solution to Structural. However, it seems that I am prohibited from doing so on MoExpress.
  So what should I do to see my fluid-structure interaction results, including mesh deformation, etc.