-
-
February 6, 2024 at 7:13 pm
Nabeel Arslan
SubscriberHi...
I am try to get the slamming loads on a ship structure using ANSYS AQWA. I input "1" as slamming load factor and also modeled a "disc element" at the bow of the ship. For the "Time Response Analysis" I used "0.0001" as the "time-step". The "Animation" shows that the "Disc Element" is entering and exiting the water. Despite all this the "Structure Forces" with subtype "Slam Only" shows zero force for the entire simulation in regular or irrgular waves in all DOF. Can anybody help me in this regrad please?
Thanks
-
February 7, 2024 at 12:57 pm
Shuangxing Du
Ansys EmployeeÂ
Please try to use either circular tube elements or slender tube elements for slamming force.
Â
-
February 7, 2024 at 3:06 pm
Nabeel Arslan
SubscriberThanks for the response...
Is it possible to compute slamming force on differaction and/or non-differaction elements?
-
February 7, 2024 at 3:34 pm
Shuangxing Du
Ansys EmployeeI am sorry that Aqwa cannot calculate the slamming force on panels.
-
- The topic ‘Computation of Slamming Loads on Ship In AQWA’ is closed to new replies.
- How do I get my hands on Ansys Rocky DEM
- Non-Intersected faces found for matching interface periodic-walls
- Unburnt Hydrocarbons contour in ANSYS FORTE for sector mesh
- Help: About the expression of turbulent viscosity in Realizable k-e model
- Script Error
- Facing trouble regarding setting up boundary conditions for SOEC Modeling
- convergence issue for transonic flow
- Running ANSYS Fluent on a HPC Cluster
- Point exception in erosion calculation
- Errors with multi-connected bodies using AQWA
-
1987
-
896
-
599
-
591
-
408
© 2025 Copyright ANSYS, Inc. All rights reserved.