CFD Optimization in Fluent

- September 8, 2023 at 11:37 am
  
  Prashant Jha
  Subscriber
  
  Hello all
  I have made a front wing of f1 car in solidworks, and imported the geometry. Now after running 1 simulation, I want to optimize my design for drag minimization and maximization of lift. I looked for some resources but everywhere it was like we have to create the geometry in ansys itself and decide the parameters therein. But how to do that for an imported CAD model. Please help me out with some resources.
  Thank You
- September 11, 2023 at 1:51 pm
  
  Rob
  Forum Moderator
  
  If the CAD was imported then you may want to look at the mesh morphing options in Fluent. Otherwise you may need to rebuild the CAD or find another way of linking the parameters.
  - September 11, 2023 at 2:04 pm
    
    Prashant Jha
    Subscriber
    
    Could you please provide me with some resources or documentation of mesh morphing options in Fluent?
    - September 11, 2023 at 2:32 pm
      
      Rob
      Forum Moderator
      
      Start with the documentation, there may be some videos in addition to the User's Guide.
- September 11, 2023 at 2:00 pm
  
  Sunil Lilhare
  Ansys Employee
  
  Hello, you can import the existing CAD in Ansys Discovery and then use Ansys Discovery CAD for further steps.
  To know more on supported file types for CAD imports in Ansys Discovery, please refer to a section of Ansys Discovery documentation whose link is given below.
  Supported File Types for Import and Export (ansys.com)
  To know how to clean the CAD for use in CFD analysis, please have a look at the Lesson 1 Part 2 of the Ansys Innovation Course on External Aerodynamic Analysis of an FSAE Car, specially designed for student teams. The link of the lesson is given below.
  FSAE CAD Preparation using Ansys Discovery| Ansys Courses
  ”If you are not able to access the link, please refer to this forum discussion: How to access the ANSYS Online Help“