We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
LS Dyna

LS Dyna

Topics related to LS-DYNA, Autodyn, Explicit STR and more.
  1. All Channels
  2. LS Dyna
  3. blank elements when displaying von mises stresses in the section plane

blank elements when displaying von mises stresses in the section plane

    • December 5, 2024 at 5:19 pm
      miriam.lohmann
      Subscriber

      I run a simulation in which a titanium rod penetrates a piece of soft tissue and compresses it. When displaying the results in the sectional plane, empty elements (white) occur in which no stress values are displayed. How does this happen? The Ogden rubber material and the SPG method are used for the tissue. 

      Thanks for help.

    • December 9, 2024 at 3:06 pm
      Ram Gopisetti
      Ansys Employee

      Hi, 

      Mat_077 for SPG is supported but not validated against FEM so expect some inconsistency. 

      Can you try the latest versions of the LSPP to see if this issue persists?

      Cheers, Ram 

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.