Axis and grid on contours FLUENT/ CFD POST

- March 8, 2020 at 12:51 am
  
  sebcin90
  Subscriber
  
  Hi, How can I insert axis and grid on a contour in Fluent or in CFD POST??I would obtain a contour as in the pic with axis to show the lenght of domain:
  
  Help!!
- March 9, 2020 at 1:33 pm
  
  Rob
  Forum Moderator
  
  The axis is defined in the solver. Do you mean the scale/ruler?
- March 9, 2020 at 2:53 pm
  
  sebcin90
  Subscriber
  
  No! I mean in Post processing . I would obtain a velocity distribution contour with axis frame x,y, where xy axis are in [m]. A lot of users do it with Tecplot, how can I insert xy axis on my contour in Fluent or in CFD Post??
  
  Thanks a lot Sir.
- March 9, 2020 at 4:51 pm
  
  Rob
  Forum Moderator
  
  You mean an xy-plot? Add a line where you want it and then create a plot.
  
  Please post an image (sketch) illustrating what you're after as I'm not quite sure what you're after.
- March 9, 2020 at 4:59 pm
  
  sebcin90
  Subscriber
  
  In fluent or CFD post I want a contour like in the pic (it's a sample of temp distribution and grid with axis):
  
  I know how to create a contour in fluent and in CFD post but I don't know hot to insert axis and grid.
- March 10, 2020 at 11:29 am
  
  Rob
  Forum Moderator
  
  We can't do that in Fluent, I'm fairly sure CFD Post can't. Not sure about Ensight.