TAGGED: ansys-apdl, apdl, slow, transient-structural
-
-
April 16, 2024 at 12:40 pm
IA
SubscriberI'm running a few variations of an ALM simulation, but have noticed APDL slowing over time. I ran and timed a few repeats of the exact same script, and even though nothing changes, the time it takes to solve gradually gets slower and slower. I have plenty of RAM available, all the scripts start with 'FINISH
/CLEAR, START'. Is there anything I should check/try? -
April 17, 2024 at 1:59 pm
mrife
Ansys EmployeeWhat is ALM? Â
-
April 17, 2024 at 2:05 pm
IA
SubscriberAn additive manufacturing process
-
April 17, 2024 at 2:15 pm
mrife
Ansys EmployeePlease be more specific; which process? There are a few. Â
-
April 17, 2024 at 2:30 pm
dlooman
Ansys EmployeeThere have been issues in the past with /clear, not completely clearing the database. Do you see the database size increasing?
-
April 23, 2024 at 11:32 am
IA
SubscriberThe .rdb files are all the same size
-
April 23, 2024 at 3:28 pm
dlooman
Ansys EmployeeOK, that's not it then. Â
-
- The topic ‘APDL slowing over time’ is closed to new replies.
- At least one body has been found to have only 1 element in at least 2 directions
- Script Error Code:800a000d
- Element has excessive thickness change, distortion, is turning inside out
- Image to file in Mechanical is bugged and does not show text
- Help to do quasistatic analysis in static structural module
-
1962
-
886
-
599
-
591
-
366
© 2025 Copyright ANSYS, Inc. All rights reserved.