Ansys Mechanical Enterprise Academic Teaching
*------------------------------------------------------------------*
| |
| W E L C O M E T O T H E A N S Y S (R) P R O G R A M |
| |
*------------------------------------------------------------------*
***************************************************************
* ANSYS MAPDL 2022 R2 LEGAL NOTICES *
***************************************************************
* *
* Copyright 1971-2022 Ansys, Inc. All rights reserved. *
* Unauthorized use, distribution or duplication is *
* prohibited. *
* *
* Ansys is a registered trademark of Ansys, Inc. or its *
* subsidiaries in the United States or other countries. *
* See the Ansys, Inc. online documentation or the Ansys, Inc. *
* documentation CD or online help for the complete Legal *
* Notice. *
* *
***************************************************************
* *
* THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION *
* INCLUDE TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY *
* PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. *
* The software products and documentation are furnished by *
* Ansys, Inc. or its subsidiaries under a software license *
* agreement that contains provisions concerning *
* non-disclosure, copying, length and nature of use, *
* compliance with exporting laws, warranties, disclaimers, *
* limitations of liability, and remedies, and other *
* provisions. The software products and documentation may be *
* used, disclosed, transferred, or copied only in accordance *
* with the terms and conditions of that software license *
* agreement. *
* *
* Ansys, Inc. is a UL registered *
* ISO 9001:2015 company. *
* *
***************************************************************
* *
* This product is subject to U.S. laws governing export and *
* re-export. *
* *
* For U.S. Government users, except as specifically granted *
* by the Ansys, Inc. software license agreement, the use, *
* duplication, or disclosure by the United States Government *
* is subject to restrictions stated in the Ansys, Inc. *
* software license agreement and FAR 12.212 (for non-DOD *
* licenses). *
* *
***************************************************************
2022 R2
Point Releases and Patches installed:
ANSYS, Inc. License Manager 2022 R2
Autodyn 2022 R2
SpaceClaim 2022 R2
LS-DYNA 2022 R2
Aqwa 2022 R2
optiSLang 2022 R2
Additive 2022 R2
Customization Files for User Programmable Features 2022 R2
Mechanical Products 2022 R2
Remote Solve Manager Standalone Services 2022 R2
Viewer 2022 R2
ACIS Geometry Interface 2022 R2
AutoCAD Geometry Interface 2022 R2
Catia, Version 4 Geometry Interface 2022 R2
Catia, Version 5 Geometry Interface 2022 R2
Catia, Version 6 Geometry Interface 2022 R2
Creo Elements/Direct Modeling Geometry Interface 2022 R2
Creo Parametric Geometry Interface 2022 R2
Inventor Geometry Interface 2022 R2
JTOpen Geometry Interface 2022 R2
NX Geometry Interface 2022 R2
Parasolid Geometry Interface 2022 R2
Solid Edge Geometry Interface 2022 R2
SOLIDWORKS Geometry Interface 2022 R2
***** MAPDL COMMAND LINE ARGUMENTS *****
BATCH MODE REQUESTED (-b) = NOLIST
INPUT FILE COPY MODE (-c) = COPY
DISTRIBUTED MEMORY PARALLEL REQUESTED
6 PARALLEL PROCESSES REQUESTED WITH SINGLE THREAD PER PROCESS
TOTAL OF 6 CORES REQUESTED
INPUT FILE NAME = C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399\dummy.dat
OUTPUT FILE NAME = C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399\solve.out
START-UP FILE MODE = NOREAD
STOP FILE MODE = NOREAD
GPU ACCELERATOR OPTION REQUESTED
1 GPU ACCELERATOR DEVICES REQUESTED
ADDITIVE MANUFACTURING MODULE REQUESTED
RELEASE= 2022 R2 BUILD= 22.2 UP20220516 VERSION=WINDOWS x64
CURRENT JOBNAME=file0 12:00:10 APR 11, 2023 CP= 0.031
PARAMETER _DS_PROGRESS = 999.0000000
/INPUT FILE= ds.dat LINE= 0
*** NOTE *** CP = 0.797 TIME= 12:00:12
The /CONFIG,NOELDB command is not valid in a distributed memory
parallel solution. Command is ignored.
*GET _WALLSTRT FROM ACTI ITEM=TIME WALL VALUE= 12.0033333
TITLE=
17-4 SS Brake Caliper Analysis--Transient Thermal (B5)
ACT Extensions:
AdditivePrintTransfer, 2020.2
72b0905f-d497-4e87-9be0-5a41da0b46df, wbex
/COM, LSDYNA, 2022.2
5f463412-bd3e-484b-87e7-cbc0a665e474, wbex
/COM, AdditiveWizard, 2022.2
d670da30-b684-4a76-8cae-363c855c1121, wbex
/COM, ANSYSMotion, 2022.2
20180725-3f81-49eb-9f31-41364844c769, wbex
SET PARAMETER DIMENSIONS ON _WB_PROJECTSCRATCH_DIR
TYPE=STRI DIMENSIONS= 248 1 1
PARAMETER _WB_PROJECTSCRATCH_DIR(1) = C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399\
SET PARAMETER DIMENSIONS ON _WB_SOLVERFILES_DIR
TYPE=STRI DIMENSIONS= 248 1 1
PARAMETER _WB_SOLVERFILES_DIR(1) = C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\17-4 SS Brake Caliper Analysis_files\dp0\SYS\MECH\
SET PARAMETER DIMENSIONS ON _WB_USERFILES_DIR
TYPE=STRI DIMENSIONS= 248 1 1
PARAMETER _WB_USERFILES_DIR(1) = C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\17-4 SS Brake Caliper Analysis_files\user_files\
--- Data in consistent NMM units. See Solving Units in the help system for more
MPA UNITS SPECIFIED FOR INTERNAL
LENGTH = MILLIMETERS (mm)
MASS = TONNE (Mg)
TIME = SECONDS (sec)
TEMPERATURE = CELSIUS (C)
TOFFSET = 273.0
FORCE = NEWTON (N)
HEAT = MILLIJOULES (mJ)
INPUT UNITS ARE ALSO SET TO MPA
*** MAPDL - ENGINEERING ANALYSIS SYSTEM RELEASE 2022 R2 22.2 ***
Ansys Mechanical Enterprise Academic Teaching
00000000 VERSION=WINDOWS x64 12:00:12 APR 11, 2023 CP= 0.797
17-4 SS Brake Caliper Analysis--Transient Thermal (B5)
***** MAPDL ANALYSIS DEFINITION (PREP7) *****
*********** Nodes for the whole assembly ***********
*********** Elements for Body 1 "Caliper17_4 (Part)\Facets" ***********
*********** Elements for Body 2 "Geom\Baseplate" ***********
*********** Elements for Body 3 "Support" ***********
*********** Send User Defined Coordinate System(s) ***********
*********** Send Materials ***********
*** WARNING *** CP = 29.906 TIME= 12:00:33
Material property ALPX of material 1 is evaluated at a temperature of
0, which is below the supplied temperature range. Temperature range
checking terminates.
*********** Create Contact "Build To Base" ***********
Real Constant Set For Above Contact Is 5 & 4
*********** Send Named Selection as Node Component ***********
*********** Send Named Selection as Node Component ***********
*********** Define Temperature Constraint ***********
*********** Create "Convection" ***********
***************** Define Uniform Initial temperature ***************
**** Start sending components for AM Supports ****
**** Done sending components for AM Supports ****
***** ROUTINE COMPLETED ***** CP = 37.609
--- Number of total nodes = 9004715
--- Number of contact elements = 875826
--- Number of spring elements = 0
--- Number of bearing elements = 0
--- Number of solid elements = 3792759
--- Number of condensed parts = 0
--- Number of total elements = 4668585
*GET _WALLBSOL FROM ACTI ITEM=TIME WALL VALUE= 12.0100000
****************************************************************************
************************* SOLUTION ********************************
****************************************************************************
***** MAPDL SOLUTION ROUTINE *****
PERFORM A TRANSIENT ANALYSIS
THIS WILL BE A NEW ANALYSIS
STEP BOUNDARY CONDITION KEY= 1
USE PRECONDITIONED CONJUGATE GRADIENT SOLVER
CONVERGENCE TOLERANCE = 1.00000E-08
MAXIMUM ITERATION = NumNode*DofPerNode* 1.0000
CONTACT INFORMATION PRINTOUT LEVEL 1
DO NOT SAVE ANY RESTART FILES AT ALL
DO NOT COMBINE ELEMENT MATRIX FILES (.emat) AFTER DISTRIBUTED PARALLEL SOLUTION
DO NOT COMBINE ELEMENT SAVE DATA FILES (.esav) AFTER DISTRIBUTED PARALLEL SOLUTION
*********** Send AM Knockdown Factors ***********
START CREATE BY COPY FROM INPUT TO knockdown.ist
END FILE CREATE
SUCCESSFULLY READ THE INITIAL STRESS FILE
DELETE FILE NAME=knockdown.ist
*********** Send AM Build Options ***********
ADDITIVE PROCESS TYPE SET TO PB
USING A LAYER -BASED APPROACH
THE TOP OF THE BASE PLATE IS AT Z= 0.0000
THE MATERIAL ID OF THE PART TO BE BUILT IS 1
THE MELT TEMPERATURE IS SET TO 1405.0
THE MATERIAL ID OF THE PART TO BE BUILT IS 3
THE MELT TEMPERATURE IS SET TO 1405.0
THE DEPOSITION LAYER HEIGHT IS SET TO 1.0000
THE MESH HEIGHT IS DEFINED TO BE 1.0000
THE DEPOSITION SCAN SPACING IS SET TO 0.10000
THE DEPOSITION SCAN SPEED IS SET TO 600.00
THE NUMBER OF SIMULTANEOUS HEATING BEAMS IS 1
*** ERROR *** CP = 40.844 TIME= 12:00:40
On the AMBU,TIME command, the recoating time value 0 is not valid. The
command is ignored.
NUMBER OF WARNING MESSAGES ENCOUNTERED= 1
NUMBER OF ERROR MESSAGES ENCOUNTERED= 1
***** PROBLEM TERMINATED BY INDICATED ERROR(S) OR BY END OF INPUT DATA *****
+--------------------- M A P D L S T A T I S T I C S ------------------------+
Release: 2022 R2 Build: 22.2 Update: UP20220516 Platform: WINDOWS x64
Date Run: 04/11/2023 Time: 12:00 Process ID: 81392
Operating System: Windows 10 (Build: 22621)
Processor Model: 11th Gen Intel(R) Core(TM) i7-11700KF @ 3.60GHz
Compiler: Intel(R) Fortran Compiler Version 19.0.5 (Build: 20190815)
Intel(R) C/C++ Compiler Version 19.0.5 (Build: 20190815)
Intel(R) Math Kernel Library Version 2020.0.0 Product Build 20191125
BLAS Library supplied by Intel(R) MKL
Number of machines requested : 1
Total number of cores available : 16
Number of physical cores available : 8
Number of processes requested : 6
Number of threads per process requested : 1
Total number of cores requested : 6 (Distributed Memory Parallel)
MPI Type: INTELMPI
MPI Version: Intel(R) MPI Library 2021.5 for Windows* OS
Number of GPUs requested : 1
GPU Acceleration: NVIDIA Library Requested but not Enabled
GPU Device with ID = 0 is: NVIDIA RTX A4000
GPU Driver Version: 11.60
CUDA Version: 11.0
Job Name: file0
Input File: dummy.dat
Core Machine Name Working Directory
-----------------------------------------------------
0 JuanBu C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399
1 JuanBu C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399
2 JuanBu C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399
3 JuanBu C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399
4 JuanBu C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399
5 JuanBu C:\Users\Juan Bu\OneDrive - University of Miami\School\Senior Design Project\Additive\_ProjectScratch\ScrA399
Latency time from master to core 1 = 2.667 microseconds
Latency time from master to core 2 = 3.205 microseconds
Latency time from master to core 3 = 2.797 microseconds
Latency time from master to core 4 = 2.985 microseconds
Latency time from master to core 5 = 2.869 microseconds
Communication speed from master to core 1 = 10569.01 MB/sec
Communication speed from master to core 2 = 12414.84 MB/sec
Communication speed from master to core 3 = 10215.03 MB/sec
Communication speed from master to core 4 = 12318.87 MB/sec
Communication speed from master to core 5 = 13123.79 MB/sec
Total CPU time for main thread : 23.8 seconds
Total CPU time summed for all threads : 42.0 seconds
Elapsed time spent obtaining a license : 3.4 seconds
Elapsed time spent pre-processing model (/PREP7) : 23.7 seconds
Elapsed time spent solution - preprocessing : 0.0 seconds
Elapsed time spent computing solution : 0.0 seconds
Elapsed time spent solution - postprocessing : 0.0 seconds
Elapsed time spent post-processing model (/POST1) : 0.0 seconds
Sum of memory used on all processes : 9886.0 MB
Sum of memory allocated on all processes : 19520.0 MB
Physical memory available : 32 GB
Total amount of I/O written to disk : 0.0 GB
Total amount of I/O read from disk : 0.0 GB
+------------------ E N D M A P D L S T A T I S T I C S -------------------+
*---------------------------------------------------------------------------*
| |
| RUN COMPLETED |
| |
|---------------------------------------------------------------------------|
| |
| Ansys MAPDL 2022 R2 Build 22.2 UP20220516 WINDOWS x64 |
| |
|---------------------------------------------------------------------------|
| |
| Database Requested(-db) 1024 MB Scratch Memory Requested 1024 MB |
| Maximum Database Used 5356 MB Maximum Scratch Memory Used 4505 MB |
| |
|---------------------------------------------------------------------------|
| |
| CP Time (sec) = 42.000 Time = 12:00:41 |
| Elapsed Time (sec) = 35.000 Date = 04/11/2023 |
| |
*---------------------------------------------------------------------------*
You are navigating away from the AIS Discovery experience