TAGGED: #thermoelectric, ansys-icepak
-
-
October 10, 2024 at 4:39 amjayaprakashSubscriber
Is it possible to assign thermal resistance for air/ambient for ICs in Icepak? If so, could someone please guide me on how to do this? Additionally, is it necessary to assign thermal resistance for air/ambient in a natural convection analysis?
-
October 22, 2024 at 2:43 pmIcemanAnsys EmployeeIn natural convection, there is no need to assign thermal resistance for case to ambient. If you do want to do that, please add a plate object on the case of IC. For conduction only simulation, please use Wall object on the case of IC. Thanks.
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- Polarization and Angle of Incidence Scan with Floquet ports in ANSYS HFSS
- SLURM integration
- How to create Lumped RLC in HFSS to match Circuit? (Simulate load as Lumped RLC)
- CPW resonant frequency HFSS Simulation
- EMA3D Current Source Problem
- Zo when applying bulk conductivity to the silicon substrate of finite-ground CPW
- Simplorer link to Maxwell transient
- Help on calculating port impedance Zpv using Field calculator under HFSS please
- Question for Maxwell
Top Contributors
-
801
-
427
-
265
-
220
-
201
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.