TAGGED: discovery-live
-
-
July 16, 2021 at 7:35 pm
seghier
SubscriberHello , i have a problem with parameter study
Right now i don't find the right way to add parameter study without error.
for example when i try to make a shape change it's height from 1 to 12 i need to first pull it to 12 than pull it back to 1 and at this height i add parameter, but this look a long way.
for rotation the shape keep rotated even if the rotation = 0 , i need step by step please
July 22, 2021 at 7:52 amNaresh Patre
Ansys EmployeeHello seghier
Please check out the example on Parametric Design Study of a Heat Sink posted on Ansys Discovery Community Forum at below link:
https://discoveryforum.ansys.com/t/m2d71m/discovery-aim-structural-thermal-simulation-of-a-heat-sink
Regards Naresh Patre
Viewing 1 reply thread- The topic ‘Ansys discovery live , parameter study help’ is closed to new replies.
Ansys Innovation SpaceTrending discussionsTop Contributors-
3311
-
1036
-
1006
-
859
-
809
Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-