Additional modules installation in Workbench 19.2

- February 14, 2019 at 12:18 pm
  
  ferranroigtio
  Subscriber
  
  Hi, everyone.
  
  I'm trying to open a .wbpj file coming from Workbench 17 in Workbench 19.2. However, a warning pops up stating: "This project contains data that requires software modules that are not installed, see Details below. Please install the required modules and try again." The listed modules under Details are: BladeGen, TurboSystemInfo, CFXPreCase, CFXSolverInput, CFXSolverResults, CFXSolverOutput. I attach the warning for further reference.
  
  I am using a student licence. I expected Ansys 19.2 products would include all those modules, as they used to be in previous versions, but they are not. Besides, I cannot find a way to install them. Are they even available in version 19.2?
  
  Anyway, are those listed modules not included in Ansys 19.2 any more? How can I add them to Workbench 19.2? Any further information would be appreciated.
  
  Regards,
- February 14, 2019 at 12:27 pm
  
  ANSYS_MMadore
  Ansys Employee
  
  If you look at your C:Program FilesAnsys Incinstall.log file, what are the modules that were installed?
  
  Thank you,
  Matt
- February 14, 2019 at 12:36 pm
  
  ferranroigtio
  Subscriber
  
  Hi, Matt.
  
  I'm looking at C:Program FilesANSYS IncANSYS Studentinstall.log, but cannot find what modules were installed. Could you give an example of what I should look for?
  
  Thanks,
  Ferran
- February 14, 2019 at 2:34 pm
  
  ANSYS_MMadore
  Ansys Employee
  
  Have you tried reinstalling? The install should include these items.
  
  Thank you,
  
  Matt
- February 14, 2019 at 3:38 pm
  
  ferranroigtio
  Subscriber
  
  Hi, Matt.
  
  I have reinstalled and everything is working fine now. Can't tell what I did differently last time.
  
  Anyway, thank you very much for your assistance.
  
  Regards,
  Ferran