Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. 3 Point bending Test of carbon fiber

3 Point bending Test of carbon fiber

TAGGED: , , , ,

    • February 11, 2023 at 11:27 pm
      Rodrigo Barata Correia
      Subscriber

      Hi there,

      I have made a 3-point bending experimental test with a carbon fiber laminate but I don't know any of the elastic or mechanical properties of the carbon fiber that I have used.

      I have the force versus displacement curve, flexural modulus, and stress vs strain curve. All for a 3-point bending configuration.

      I've also done a 3-point bending simulation in Ansys with the generic 230 GPa woven carbon fiber but the results are way too off. Is there a way for me to extrapolate the properties of this carbon? Maybe changing the modulus of elasticity.

      I will leave a picture of the results I got experimentally and with Ansys.

       

    • April 21, 2023 at 3:01 pm
      Ashish Khemka
      Forum Moderator

      Hi,

      Please see if the following link helps: 3 Point Bending Test of Carbon Fiber Reinforced Epoxy Composite on ANSYS Explicit Dynamics - YouTube

      Regards,

      Ashish Khemka

Viewing 1 reply thread
  • The topic ‘3 Point bending Test of carbon fiber’ is closed to new replies.
Innovation Space
Top Contributors

© 2026 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
[bingo_chatbox]