We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › mesh independence study for non-premixed oxy-coal combustion › Reply To: mesh independence study for non-premixed oxy-coal combustion

November 20, 2024 at 5:12 pm
ll00023
Subscriber

these results from coarse mesh.

temperature at upstream. it fluctuates a little bit but I assume this is acceptable because the turbulence is expected to be strong, even if this is a RANS case.

this is another monitor point in downstream.

Temperature profile of three meshes: 

Â