We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › mesh independence study for non-premixed oxy-coal combustion › Reply To: mesh independence study for non-premixed oxy-coal combustion

November 20, 2024 at 11:47 am
Rob
Forum Moderator

It may also be the coarse mesh not being sufficiently resolved in the flame region. I'm assuming the particles are much smaller than the cells in all cases as you're using DPM.Â