We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Photonics › the error in measure of optical power meter › Reply To: the error in measure of optical power meter

October 22, 2024 at 7:07 pm
Guilin Sun
Ansys Employee

Sorry for the confusion. OPWM measures the transmitted power. This is why the power at port1 of WGD_1 is its default value of -110dBm. it means no power is transmitted from port2 to port 1 in the waveguide.