We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Installation and Licensing › Ansys Products › “Ansys.Fluent.Cortex.CortexNotAvailableException” was thrown › Reply To: “Ansys.Fluent.Cortex.CortexNotAvailableException” was thrown

September 3, 2024 at 7:20 am
ashishkumar.gupta
Subscriber

Hi Rahul,

From the first point, I understand that the Fluid (here Lubricant) should be surrounded by the Solid (here Raceway)...am I right?

I am attaching a SS of my model here. Here, my Fluid is not surrounded by the Solid from alkl the sides. It is like a Sandwhich. So the FSI is the bottom surface of the TOP RACE and upper surface of the BOTTOM Race.  PS: All are pure Solid objects.

 

Also, I tried to give 'HEx Dominant# mesh of size 0.1 mm to Fluid and 0.5 mm to Raceway interacting surfaces. So I do not really understand why my model is not working?

Thank you!