August 21, 2024 at 1:19 pm
Atish Gawale
Bbp_participant

Hi,

I am running fluid analysis using CESE solver.

I am able to use higher processor now. I ran with 16 processors and I get following error.

With MPP_D and 1 processor there is no error. with higher processors I get following error.

mes0000

No elements with calculated timesteps
       1 t 0.0000E+00 dt 2.22E-09 flush i/o buffers            08/21/24 13:46:17
       1 t 0.0000E+00 dt 2.22E-09 write d3plot file            08/21/24 13:46:17
 
 *** Error 100116 (CESE+116) (processor # 0)
       20959704 errors detected in CESE solver during step = 1
 
 *** Error 100117 (CESE+117) (processor # 0)
              1 of these CESE solver errors detected on processor # 0
 
 *** Error 100118 (CESE+118) (processor # 0)
     Errors detected in CESE solver integration step.
     Please check each processor's message file for details.
 
 When error termination was triggered, this processor was
 past the output routines
 
mes0001 - to mes 0015 i got following error.
 
No elements with calculated timesteps
 
 *** Error 150209 (CHEM+209)
     Chemistry EOS nonlinear temperature solver failed to converge.
     Error code = 50 Last iterate temperature = NaN
 
Do I need to include any control cards for MPP (*CONTROL_MPP_XXXXX)? 
 
Regards,
Atish