The Ansys Innovation Space website recently experienced a database corruption issue. While service has been restored there appears to have been some data loss from November 13. We are still investigating and apologize for any issues our users may have as a result.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › convergence criteria and user interrupt condition didn’t work › Reply To: convergence criteria and user interrupt condition didn’t work

May 17, 2024 at 4:38 pm
rfblumen
Ansys Employee

The Interrupt Control Option is set to "All Interrupts".  This means that not only the residual target must be met (along with a conservation target if set) but also all user interrupt conditions.  There is a user interrupt condition, Iterations, that isn't being shown in your screenshots.  I would check that to make sure that condition is also met.