Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Multiphase with different phase zone condition › Reply To: Multiphase with different phase zone condition
May 7, 2024 at 10:28 am
Rob
Forum Moderator
I suspect you've misunderstood the set up. A solid zone is "solid" so isn't flowing, only conduction is solved. In the multiphase model(s) the fluid zone will have mixture, phase-1, phase-2..... phase-n options in the zone. We typically don't need to alter anything in the fluid cell zone panel. You will need to initialise & patch (plus boundary conditions) to set the phase values. Have a look at the various tutorials in Help & Learning.Â