We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Transient Porous Media Combustion › Reply To: Transient Porous Media Combustion

Foo Sin Khai
Subscriber

Regarding the issue of the lack of fuel in the second porous region that you mentioned, the mass fraction contour of CH4 as shown in picture below indicates that the fuel concentration in the porous zone is similar to that in the combustion zone. Based on this observation, one would expect that since the contour of the mass fraction of fuel and CH4 is the same, there should be an adequate amount of fuel present in the porous zone. However, I'm unsure if my understanding of this is correct.