We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Installation and Licensing › Ansys Products › ANSYS LUMERICAL › Reply To: ANSYS LUMERICAL

October 16, 2023 at 6:01 pm
Kang Donggil
Subscriber

I would like to evaluate the performance of the MZI-based EO modulator by utilizing Lumerical's interconnect. (The parameter of TW electrode was extracted through HFSS of ANSYS.)

However, in the example provided, there were many explanations for the EYE diagram, but no explanations were found for how to obtain the EO bandwidth.

However, I found a similar file utilizing impulse response in the example of ring modulator, but it didn't work well in my case. (I had a problem where the bandwidth changes every time I change the sample rate)

So I'd like to know how to get EO bandwidth from EO modulator in general.