General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. An error has occurred in the Distributed Sparse Matrix Solver while inputting the matrix value.

An error has occurred in the Distributed Sparse Matrix Solver while inputting the matrix value.

TAGGED: , , ,

    • October 6, 2020 at 11:58 am
      AmbarNaik13
      Subscriber
      While simulating a structure, in the third step which is after bolt pretension and lock, the loads are acting on the structure. Just when the third step starts, I get the following error in the solver output and the simulation is terminated.nAn error has occurred in the Distributed Sparse Matrix Solver while inputting the matrix values. Error code = 5. Please send the data leading to this operation to your technical support provider, as this will allow ANSYS, Inc to improve the program.n
    • October 13, 2020 at 4:22 pm
      Gary_S
      Ansys Employee
      nThe model is likely becoming unconstrained in the third step. nLets adjust some settings to see if we can at least get a solution.nTry unselecting Use Distributed Solver nand/ornSetting Solver Type to Iterative (Default is Program Controlled)n
Viewing 1 reply thread
  • The topic ‘An error has occurred in the Distributed Sparse Matrix Solver while inputting the matrix value.’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.