Learning Forum

[Amal85]

Hi,

How to solve when this error happen? This error message came out when using HFSS module. The OS using is Linux. Is there any advise?

[tsiriaks]

I would recommend to use HFSS/AEDT outside of the Workbench unless you really need Workbench for some unique functionalities.n

[Amal85]

Still need to use Workbench for the project and also has turned off security and firewall software but it does not work.nn

[tsiriaks]

What version is this ?nIf you open up a blank Workbench session, then insert HFSS module and double click on Geometry cell, does it launch AEDT successfully ?n

[Amal85]

When double click on Geometry in workbench, AEDT cannot be launched. When launched AEDT alone, it come out with error : feature has expired. flexnet error -147, -10. However, the license is still valid. The version using now is 2019.R3n

[tsiriaks]

Please post screenshot of the complete error message when launching stand-alone AEDTnAlso, open up Client ANSLIC_ADMIN Utility and check license status, then post the output of it heren

[Amal85]

Hi!n Thank you for your response. Finally we can open AEDT. This happen because of we used expired licenses key. After change to a new license key the software can be opened.nn