Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Innovation Space

FREE STUDENT SOFTWARE

Can’t set up element size smaller than 4 mm when setting up a mesh

- August 26, 2020 at 10:10 am
  
  Aledaponte85
  Subscriber
  
  Hi,nMy name is Alejandro da Ponte. I am working on a simulation and I need to set up the mesh with elements smaller than 4 mm to study the influence on the stress in an specific area of the model. But when I go bellow 4 mm on the mesh option it puts the number on Yellow and doesn't let me generate a new mesh. There is no error message or anything, just the yellow marking. I know this mean that I need to change something up in the tree but I can not find what it is. I even try with a very simple model, just a small rectangle to see if it was a problem of the geometry but, the problem persist.nCan anyone help me to figure it out?.Thanks in advance to you allnbest regardsn
- August 26, 2020 at 2:06 pm
  
  das.3
  Subscriber
  
  Try disabling mesh defeaturing as I suspect that this might be causing the problem.n
- August 26, 2020 at 4:41 pm
  
  Aledaponte85
  Subscriber
  
  Thank you, that workedn
- August 28, 2020 at 6:50 am
  
  das.3
  Subscriber
  
  Anytime!n

Viewing 3 reply threads

The topic ‘Can’t set up element size smaller than 4 mm when setting up a mesh’ is closed to new replies.

[bingo_chatbox]