-
-
September 27, 2017 at 11:19 amadminAnsys Employee
First, run a transient CFD-simulation using the FWH acoustics model, and record asd-files in regions of interest (asd: acoustic source data). After the simulation, enable beta-features (use the TUI: define/beta-feature-access yes yes), go to "Run Calculation", and select "Acoustic Sources FFT". In the "Read ASD Files" tab, select the *.index-file, which accesses all relevant asd-files. Click "Read". After, compute FFT fields in the related tab. In the "FFT Surface Variables" tab, select "Set of Modes" as "Modes/Frequency Bands", and then click "Create". Doing so creates real and imaginary parts of the complex pressure. Using them, the magnitude and the phase of the pressure signal can be computed. Phase-spectrum of phase-angle PSI: tan PSI(f) = ImY(f)/ReY(f) Magnitude-spectrum: |Y(f)| = (ReY(f)^2+ImY(f)^2)^1/2 By means of custom-field-functions, the real and imaginary parts can be combined to get the phase information.
-
September 27, 2017 at 11:19 amadminAnsys Employee
How do I access the phase information of acoustic pressure in aero-acoustic simulations?
-
- The topic ‘Access the phase information of acoustic pressure in aero-acoustic simulations’ is closed to new replies.
- How do I get my hands on Ansys Rocky DEM
- Non-Intersected faces found for matching interface periodic-walls
- Fluent fails with Intel MPI protocol on 2 nodes
- Unburnt Hydrocarbons contour in ANSYS FORTE for sector mesh
- Help: About the expression of turbulent viscosity in Realizable k-e model
- Cyclone (Stairmand) simulation using RSM
- Mass Conservation Issue in Methane Pyrolysis Shock Tube Simulation
- Script Error
- Facing trouble regarding setting up boundary conditions for SOEC Modeling
- convergence issue for transonic flow
-
1602
-
613
-
599
-
591
-
366
© 2025 Copyright ANSYS, Inc. All rights reserved.