Learning Forum

[Jaydongordon46]

I am a Third year engineering student working on an aluminium honeycomb Impact Attenuator for my FS/FSAE team.

For my project within Prepost/Dyna I followed this video:

?si=tv_cjp77mjVnGBDF 

I've done everything up to the point where I need to run my simulations but it gives me an error termination and I don't know what to do.

Attached is my proof & my project

[Ram Gopisetti]

Hi, 

It is always a best practice to toggle solver output by toggling this button this will give information on what error and code and other resonse from the solver. 

If you can share us the what error code and fall back response is outputted better guidence can be given. 

Cheers, Ram

[Jaydongordon46]

Hi Ram,

I did what you told me and i got this

[Ram Gopisetti]

Hi

Please check if you have blank and extra lines in the deck. If possible please save the model by hitting ctrl+s with in LSPP and close and reopen the model for correcting formatting issues. 

Cheers, Ram

[Jaydongordon46]

I've went and checked and nothing seems to be blank or extra. I retraced my steps yet I see nothing that shouldn't be there or should be there

I ran it again and nothing still.

Same error termination