Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.
Electronics

Electronics

Topics related to HFSS, Maxwell, SIwave, Icepak, Electronics Enterprise and more.
  1. All Channels
  2. Electronics
  3. Maxwell 3D DC conduction, how to add contact resistance

Maxwell 3D DC conduction, how to add contact resistance

    • March 6, 2026 at 7:49 am
      saivishnu
      Subscriber

      currently using Thin layer for contact resistance , but from last 2024 R2 version if i add thin layer i am geeting 3Deqs error, is there any other way to add contact resistace 

    • March 9, 2026 at 6:07 pm
      MirandaH
      Ansys Employee

      If you get an error message: [error] Process '3deqs' terminated abnormally. It may have run out of memory or could have been killed by the user.

      There is an error in the analysis settings or there is insufficient memory for the calculation.

      If the error occurs immediately after the calculation, please check that the voltage and current settings and boundary conditions are correctly defined.

      If the error occurs after a while after the calculation, please check the memory usage status in the Maxwell 3D menu > Results > Solution Data > Profile tab

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Innovation Space
Top Contributors

© 2026 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
[bingo_chatbox]