Simulation completed with execution error on server: Local Machine.

- May 18, 2020 at 6:36 pm
  
  iris
  Subscriber
  
  Could someone help me with this problem?
  
  I am using a primitive PolygonHelix to design a flat coil, using the basic standards of antenna design. I use a triangle as an excitation port(lumped port). I also create a radiation box (create open region), a setup (560 hz) and an analysis frequency. I simulated the coil with 10 turns, although I would like to vary the number of turns later. However when I use "validate", it works well but when Analyzing All, the answer is as shown in the images (Simulation completed with execution error on server: Local Machine.). Any suggestion.
- May 18, 2020 at 6:43 pm
  
  iris
  Subscriber
- May 20, 2020 at 1:55 pm
  
  rtk
  Ansys Employee
  
  Hello Iris,
  
  It seems like this query is already answered in another thread.
  
  For your reference, dropping the thread link here:
  
  /forum/forums/topic/simulation-completed-with-execution-error-on-server-local-machine
  
  Regards,