Learning Forum

[fedjounali]

how can i export results back from a steady state thermale analysis into ansys Maxwell 19.5.
when i make RMB on importes load it doesn't show export results option?

[Mark Christini]

There are many different options for magnetic loss-thermal coupling between Maxwell and Workbench.

• Maxwell 2D or 3D, Eddy Current or Transient
• ANSYS Workbench Steadystate thermal or ANSYS Workbench Transient thermal 
• 1-way or 2-way coupling

Depending on the solvers being used, the settings can be somewhat different.  Note for 2-way thermal coupling be sure to:

1) In Maxwell, assign temperature dependent materials 

2) In Maxwell, enable temp dependent under Maxwell 3D > Set Object Temperature > Include Temperature dependent and Enable Feedback

3) In ANSYS Workbench, enable "beta" options in  (under Tools > Options > Appearance and scroll down to check box)

 

[fedjounali]

thanks for your answer ! i tried this but still i can't get export results option in steady state thermale after solving the problème !

[fedjounali]

in the help they said that i have to set export option in order to export results back to maxwell however i don't know how to do that?

[dingdangsunny]

.

Thank you very much, I also met the same problem. Your answer is useful. Is is so cool.

.

[henry_ansys]

.

i am also tried all of those but can not find the export results option, do you solve the problem? thanks very much

my version is 2021R1

.