Ansys crashes everytime I plot Fields

- April 20, 2025 at 1:21 pm
  
  kkbhalla
  Subscriber
  
  Hi, After simulation, whenever I plot A or B field in the electronic desktop, Ansys crashes with this message. I have tried different simulation, different Ansys version, but the result is same. It just keeps crashing. What could be the issue here?
  Thank You
- April 21, 2025 at 5:25 am
  
  Takeshi Itadani
  Ansys Employee
  
  Make sure you are using the Graphics Cards listed in Platform Support.
  Platform Support and Recommendations | Ansys
  Please update your graphics driver to the latest version.
  If the symptoms still persist, open the NVIDIA Control Panel, go to Manage 3D Settings > Global Presets and change the Base Profile to “ Dassault Systemes - V5 / 3DExperience ”, reboot the device and make sure the settings are in the same state as they were after the change before operating AEDT. Please try to operate AEDT after restarting the terminal and confirming that the settings have been changed.
  - June 13, 2025 at 6:43 pm
    
    Steve-357
    Subscriber
    
    This worked for me too. Thank you so much!
    This was driving me crazy!
- April 21, 2025 at 5:59 am
  
  kkbhalla
  Subscriber
  
  Thanks a lot. Changing the 3D settings worked.
- April 22, 2025 at 9:20 am
  
  ngv-wg22
  Subscriber
  
  For my situation how i solve it
- April 23, 2025 at 1:12 am
  
  Takeshi Itadani
  Ansys Employee
  
  Are you using a supported graphics card?
  
  https://www.ansys.com/content/dam/release/2025-r1/platform-support/ansys-2025-r1-graphical-display-graphics-cards.pdf

Viewing 4 reply threads

You must be logged in to reply to this topic.

Electronics

Ansys crashes everytime I plot Fields

Edit Discussion